General form:

RXXXXXXX n+ n- <value> <mname> <l=length> <w=width>
+ <temp=val> <dtemp=val> <m=val> <ac=val> <scale=val>
+ <noisy = 0|1>

Examples:

RLOAD 2 10 10K
RMOD 3 7 RMODEL L=10u W=1u

This is the more general form of the resistor presented before (3.2.1) and allows the modeling of temperature effects and for the calculation of the actual resistance value from strictly geometric information and the specifications of the process. If value is specified, it overrides the geometric information and defines the resistance. If mname is specified, then the resistance may be calculated from the process information in the model** mname** and the given length and width. If value is not specified, then mname and length must be specified. If width is not specified, then it is taken from the default width given in the model.

The (optional) temp value is the temperature at which this device is to operate, and overrides the temperature specification on the .option control line and the value specified in dtemp.