BADMOS3
Use the older version of the MOS3 model with the `kappa'
discontinuity.
DEFAD=x
resets the value for MOS drain diffusion area; the default is 0.
DEFAS=x
resets the value for MOS source diffusion area; the default is 0.
DEFL=x
resets the value for MOS channel length; the default is 100
(\mu m).
DEFW=x
resets the value for MOS channel width; the default is 100
(\mu m).
SCALE=x
set the element scaling factor for geometric element parameters
whose default unit is meters. As an example: scale=1u and a MOSFET
instance parameter W=10 will result in a width of 10(\mu m) for
this device. An area parameter AD=20 will result in
(\mathsf{20e - 12 m^{2}}). Following instance parameters are
scaled: